MAX13041:±80V Fault-Protected High-Speed CAN Transceiver with Low-Power Management and Wake-On CAN

GIFT Certified CAN Transceiver Offering ±80V Fault Protection, Consuming Only 18?A Sleep Current

The MAX13041 ±80V fault-protected, high-speed controller area network (CAN) transceiver is ideal for high-speed automotive network applications where high reliability and advanced power management are required. The device links a CAN protocol controller to the physical bus wires of the controller area network and allows communication at speeds up to 1Mbps. The extended fault-protected voltage range of ±80V on CAN bus lines allows for use in +12V or +42V automotive, and higher voltage +24V and +36V mid-heavy truck applications. Advanced power management features make the MAX13041 ideal for automotive electronic control unit (ECU) modules that are permanently supplied by battery, regardless of the ignition switch position (clamp-30, Type-A modules). The device controls one or more external voltage regulators to provide a low power sleep mode for an entire clamp-30 node. Wake-on CAN capability allows the MAX13041 to restore power to the node upon detection of CAN bus activity. The MAX13041 is functionally compatible with the Philips TJA1041A and is a pin-to-pin replacement with improved performance. The MAX13041 is available in a 14-pin SO package, and operates over the -40°C to +125°C automotive temperature range.

Key Features
  • Functionally Compatible Pin-to-Pin Replacement for the Philips TJA1041A
  • ±12kV HBM ESD Protection on CANH, CANL
  • ±80V Fault Protection on CANH, CANL, SPLIT; Up to +76V Operation on VBAT
  • Fully Compatible with the ISO11898 Standard
  • Low VBAT Supply Current in Standby and Sleep Modes (18?A Typical)
  • Voltage Level Translation for Interfacing with +2.8V to +5.5V CAN Protocol Controllers
  • Recessive Bus Stabilization (SPLIT)
  • Allows Implementation of Large Networks
MAX13041: Typical Operating Circuit
MAX13041: Typical Operating Circuit
  • +12V Automotive-Clamp 30 Modules
  • +24V Mid-Heavy Truck- Clamp 30 Modules
  • +42V Automotive-Clamp 30 Modules
  • Military and Commercial Aircraft
titleDownload file
MAX13041?Data SheetMAX13041.pdf
Part NumberICC (Dominant Mode)
Fault Protect.
Fault TolerantICC (Recessive Mode)
ICC (Shutdn.)
ESD Protect.
Slew Rate LimitingVSUPPLY
MAX130418080No61.8 (Standby Mode)12No5SOIC(N)/14
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX13041ASD+ActiveSOIC(N),;14 pin;54.3 mm?-40°C to +125°CLead Free
MAX13041ASD+TActiveSOIC(N),;14 pin;54.3 mm?-40°C to +125°CLead Free
MAX13041ASD/V+ActiveSOIC(N),;14 pin;54.3 mm?-40°C to +125°CLead Free
MAX13041ASD/V+TActiveSOIC(N),;14 pin;54.3 mm?-40°C to +125°CLead Free
MAX13041.pdf MAX13041
MAX13041.pdf MAX13041
MAX13041.pdf MAX13041
Achieve ISO 11898-2-Compliant 5V HS-CAN Communication from a 3.3V Supply MAX13041
MAX13041.pdf MAX13041
MAX13041.pdf MAX13041
XML 地图 | Sitemap 地图