MAX13051:±80V Fault-Protected CAN Transceiver with Autobaud

The MAX13051 ±80V fault-protected CAN transceiver with autobaud is ideal for device net and other industrial network applications where overvoltage protection is required. The MAX13051 provides a link between the CAN protocol controller and the physical wires of the bus lines in a control area network (CAN). The MAX13051 features three different modes of operation: high speed, slope control, and standby. High-speed mode allows data rates up to 1Mbps. The slope-control mode can be used to program the slew rate of the transmitter for data rates of up to 500kbps, reducing the effects of EMI and allowing the use of unshielded-twisted or parallel cable. In standby mode, the transmitter shuts off and a low-power receiver monitors the bus, waiting for a wake-up signal. The MAX13051 provides a transmitter data (TXD) dominant timeout function that prevents erroneous CAN controllers from clamping the bus to a dominant level if the TXD input is held low for greater than 1ms. The MAX13051 also provides an autobaud feature allowing the microcontroller to compute the incoming baud rate without destroying CAN protocol communication. The MAX13051 input common-mode range is greater than ±12V, exceeding the ISO 11898 specification of -2V to +7V, and features ±6kV Human Body Model protection, making these devices ideal for harsh environments. The MAX13051 is available in an 8-pin SO package and is specified from the -40°C to +85°C and -40°C to +125°C temperature ranges.

Key Features
  • Fully Compatible with the ISO 11898 Standard
  • Autobaud Mode
  • Short-Circuit Protection
  • High-Speed Operation Up to 1Mbps
  • Slope-Control Mode
  • Low-Current Standby Mode
  • Thermal Shutdown
  • Transmit Data Dominant Timeout
  • ±6kV Human Body Model ESD Protection
  • Greater than ±12V Common-Mode Range
MAX13051: Typical Operating Circuit
MAX13051: Typical Operating Circuit
Applications/Uses
  • Device Net Nodes
  • HVAC
  • Industrial Networks
  • Telecom
DataSheet
titleDownload file
MAX13051?Data SheetMAX13051.pdf
Parametrics
Part NumberICC (Dominant Mode)
(mA)
Fault Protect.
(±V)
Fault TolerantICC (Recessive Mode)
(mA)
ICC (Shutdn.)
(?A)
ESD Protect.
(±kV)
Slew Rate LimitingVSUPPLY
(V)
Package/PinsBudgetary
Price
maxtyptypSee Notes
MAX130517280No525 (Standby Mode)6Yes5SOIC(N)/8$2.16 @1k
Quality and Environmental Data
Related Products
  • MAX3050:±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceivers
  • MAX3057:±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceivers
  • MAX3053:±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX13051ASANo Longer AvailableMAX13051ASA+SOIC(N),;8 pin;31 mm?-40°C to +125°CNo
MAX13051ASA+ActiveSOIC(N),;8 pin;31 mm?-40°C to +125°CLead Free
MAX13051ASA+TActiveSOIC;-40°C to +125°CSee data sheet
MAX13051ASA-TNo Longer AvailableMAX13051ASA+TSOIC;8 pin-40°C to +125°CSee data sheet
MAX13051ESANo Longer AvailableMAX13051ESA+SOIC(N),;8 pin;31 mm?-40°C to +85°CNo
MAX13051ESA+ActiveSOIC(N),;8 pin;31 mm?-40°C to +85°CLead Free
MAX13051ESA+TActiveSOIC(N),;8 pin;31 mm?-40°C to +85°CLead Free
MAX13051ESA-TNo Longer AvailableMAX13051ESA+TSOIC;8 pin-40°C to +85°CSee data sheet
MAX13051.pdf MAX13051
MAX13051.pdf MAX13051
MAX13051.pdf MAX13051
MAX13051.pdf MAX13051
MAX13051.pdf MAX13051
XML 地图 | Sitemap 地图