MAX3057:±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceivers

The MAX3050/MAX3057 interface between the CAN protocol controller and the physical wires of the bus lines in a controller area network (CAN). They are primarily intended for systems requiring data rates up to 2Mbps and feature ±80V fault protection against short circuits in high-voltage power buses. They provide differential transmit capability to the bus and differential receive capability to the CAN controller. The MAX3050/MAX3057 have four modes of operation: high speed, slope control, standby, and shutdown. High-speed mode allows data rates up to 2Mbps. In slope-control mode, data rates are 40kbps to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cable can be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. In shutdown mode, the transmitter and receiver are switched off. The MAX3050 has an AutoShutdown? function that puts the device into a 15?A shutdown mode when the bus or CAN controller is inactive for 4ms or longer. The MAX3050/MAX3057 are available in an 8-pin SO package and are specified for operation from -40°C to +125°C.

Key Features
  • ±80V Fault Protection for 42V Systems
  • Four Operating Modes
    • High-Speed Operation Up to 2Mbps
    • Slope-Control Mode to Reduce EMI (40kbps to 500kbps)
    • Standby Mode
    • Low-Current Shutdown Mode
  • AutoShutdown when Device Is Inactive (MAX3050)
  • Automatic Wake-Up from Shutdown (MAX3050)
  • Thermal Shutdown
  • Current Limiting
  • Fully Compliant with the ISO-11898-2 Standard (MAX3050 Only)
MAX3050, MAX3057: Typical Operating Circuit
MAX3050, MAX3057: Typical Operating Circuit
  • HVAC Controls
  • Telecom 72V Systems
titleDownload file
MAX3050-MAX3057?Data SheetMAX3050-MAX3057.pdf
Part NumberICC (Dominant Mode)
Fault Protect.
ICC (Recessive Mode)
ICC (Shutdn.)
ESD Protect.
Slew Rate LimitingVSUPPLY
maxtyptypSee Notes
MAX30506805.5153Yes5SOIC(N)/8$1.82 @1k
Quality and Environmental Data
Related Products
  • MAX3054:±80V Fault-Protected/Tolerant CAN Transceivers for In-Car Applications
  • MAX3055:±80V Fault-Protected/Tolerant CAN Transceivers for In-Car Applications
  • MAX3056:±80V Fault-Protected/Tolerant CAN Transceivers for In-Car Applications
  • MAX3053:±80V Fault-Protected, 2Mbps, Low Supply Current CAN Transceiver
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX3057ASANo Longer AvailableMAX3057ASA+SOIC(N),;8 pin;30.9 mm?-40°C to +125°CNo
MAX3057ASA+ActiveSOIC(N),;8 pin;30.9 mm?-40°C to +125°CLead Free
MAX3057ASA+TActiveSOIC(N),;8 pin;30.9 mm?-40°C to +125°CLead Free
MAX3057ASA-TNo Longer AvailableMAX3057ASA+TSOIC(N),;8 pin;30.9 mm?-40°C to +125°CNo
MAX3050-MAX3057.pdf MAX3057
MAX3057.pdf MAX3057
MAX3050-MAX3057.pdf MAX3057
XML 地图 | Sitemap 地图